Basic Info.
Certification
EST, ISO, CB, CE, TUV
Material
Monocrystalline Silicon
Solar Cell Tpye
166mm/182mm/210mm
Connector Type
Mc4 PV Connector
Junction Box
IP68, 3 Bypass Diode
Glass
3.2mm High Transmission Tempered Glass
Frame
Anodized Aluminium Alloy
Packing
31PCS/Pallet, 620PCS/40hq
Transport Package
Carton and Pallets
Specification
2239x1052x35 mm
Product Description
Shingled cells are made by dividing a full-size cell into five strips with each section being one fifth the size of a full cell. The narrow cell strips are assembled into long strings of 34 to 40 cells depending on the panel size. This results in a similar string voltage of a regular panel but a fifth of the electrical current. Lowering the string current reduces the resistance and operating temperature which reduces the chance of hot spots forming if there is ever a faulty cell or micro-crack.Shingled solar cell
Unlike traditional solar panels which use soldered ribbons to interconnect the cells, shingled cell panels instead use electrically conductive adhesive (ECA) which reduces stress on the cells during manufacture. Additionally, as panels heat up and expand slightly during the day traditional solder ribbon expands and can eventually fail while the conductive adhesive used on shingled cells helps reduce the internal stresses due to thermal expansion.
Another benefit of using the shingled cell format where the strings of cells are assembled horizontally across the panel is the improved shade tolerance. Since each string of cells is essentially independent, if one or more strings are shaded it does not reduce the current of the other strings.
Shingled cells in strings are able to operate independently and perform very well under partially shaded conditions
1. Higher power per square metre
2. Less energy loss due to shading
3. Low busbar failures
4. Better mechanical performance
5. More attractive
| Maximum Power at STC | 480W | 485W | 490W |
| Maximum Power Voltage (Vmp) | 38.31V | 38.62V | 38.86V |
| Maximum Power Current (Imp) | 12.53A | 12.57A | 12.61A |
| Open-circuit Voltage (Voc) | 46.61V | 46.68V | 46.75V |
| Short-circuit Current (Isc) | 13.21A | 13.33A | 13.45A |
| Module Efficiency | 20.4% | 20.6% | 20.8% |
| Maximum System Voltage | 1500V | 1500V | 1500V |
=
Address:
1201 Huafeng Road, Shushan District, Hefei, Anhui, China
Business Type:
Manufacturer/Factory
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, ISO 14064, QC 080000, BRC, SA 8000, QHSE, HACCP, BS 25999-2, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, BREEAM, HQE, SHE Audits, IFS, QSR, ISO 50001, LEED, PAS 28000, FSC, ISO 10012, ISO 17025
Company Introduction:
WEUP Power Co., Ltd was established in 2008. We mainly produce and sell solar modules and solar energy storage batteries. With the concept of "clean energy is the future", we are committed to providing customers with solar energy solutions, to provide customers with clean energy and reduce energy bills. Since its establishment, we have provided solar energy solutions to customers in more than 60 countries around the world. The total installed capacity exceeds 6GW. And it has established a stable cooperative relationship with more than 50 customers around the world.
As a manufacturer of solar modules and solar energy storage batteries, We not only provides customers with high-quality products, we also provide customers with the design and configuration of one-stop solar system solutions, including On-grid systems, Off-grid systems and energy storage system. The purpose is to make it easier for customers to understand and install solar energy systems. Before sales, we will provide customers with comprehensive and easy-to-understand program designs. After sales, we will provide customers with detailed installation instructions.
Photovoltaic projects rely on high quality products that stand the test of time. In our upstream production, we tightly control every step of the manufacturing process, from silicon crystallization to module deployment in the field, ensuring the highest level of quality. We guarantee our products with an industry-leading 25-year lifetime warranty. We follows strict compliance with national regulations and industry standards, including Chinese National Standards GB 50797 "Photovoltaic Power Station Design Specifications, " GB 50794 "Photovoltaic Power Plant Construction Specifications, " GBT 50866 "Design Code for Photovoltaic Power Station Connection to Power System and GBT 19939 "photovoltaic system Grid technology requirements, " and others. With an innovative solar design team, rigorous procurement procedures and experienced construction and operation team, We have over 15 years′ expertise in PV project development.
As a socially responsible company, we have provided night lighting for many areas in Africa with unstable electricity. This enables children in Africa to study at night and greatly facilitates the lives of local residents. We provide them with very cheap solar modules, to make affordable cost.
